High Voltage Vacuum Contactor 160A

150.00$ – 405.50$

Model Number: JCZ5

JCZ5-12 series indoor AC high voltage vacuum contactor (referred to as contactor for short) is divided into two types: closing mechanical holding and electromagnetic holding. The contactor is suitable for three-phase AC 50HZ. The rated voltage is 12KV. The rated current is up to 630A In the power system, it is used for long-distance connection and disconnection of lines, control of high-voltage motors, transformers and capacitive loads and other electrical equipment, especially suitable for various frequent operation fields.
The contactor is small in size and light in weight. It adopts the popular international assembly structure of upper and lower arrangement, which is easy to use and maintain, and it is easy to form a complete set of FC circuit equipment.

2. Normal use conditions
a) Upper limit of ambient air temperature; +40 ^o C, lower limit; -25 ^o C,
b) The altitude does not exceed 2000M
c) Humidity; the daily average of relative humidity is not more than 95% and the monthly average is not more than 90%; the daily average of water vapor pressure is not more than 2.2KPA, and the monthly average is not more than 1.8KPA.
d) The surrounding air should not be significantly polluted by corrosive or flammable gas and water vapor.
e) No frequent strenuous exercise.
f) When the contactor moves, the inclination angle between the installation plane and the horizontal is not more than ^5o .
g) Requirements beyond the above conditions shall be agreed by the user and the manufacturer.

3. Main technical parameters
3.1 Rated parameters

serial number	name		unit	data
				JCZ5-12J/D-630/400/250
1	Rated voltage		kV	12
2	Rated current		A	630	400	250
3	Rated making current (RMS)		A	6300	4000	2500
4	Rated maximum breaking current			5040	3200	2500
5	4S thermal stable current			6300	4000	2500
6	Limit breaking current			6300	4000	2500
7	Power frequency withstand voltage		kV	42
8	allowable operating frequency		times/h	300
9	Electrical life	AC-3	×10 ⁴ times	25
		AC-4		10
10	Mechanical life			30
11	Rated operating voltage		V	AC110/220
12	Closing coil pull-in current		A	≤ DC6/3
13	hold coil hold current			D: DC0.32/0.16
14	Shunt coil trip current			J: DC2.5/1.3

3.2 Mechanical adjustment parameters

serial number	name	unit	data
serial number	name	unit	JCZ5-12J/D-630/400/250
1	Contact Spacing	mm	6+1.0-0.5
2	Contact overtravel	mm	1.5±0.5
3	Average closing speed	m/s	0.1~0.25
4	Average opening speed	m/s	0.3~0.6
5	Three-phase closing and opening synchronization	ms	≤ 2
6	Closing time/opening time	ms	≤ 150/ ≤ 150
7	Conductive loop resistance of each phase (20 ^o C)	Ω	≤ 250